Description
Although ALLIGATOR® All-Purpose Wall Anchors may look like ordinary plastic plugs, they function very differently to hold more weight than most concrete anchors and masonry anchors made out of metal.
Thanks to the ALLIGATOR anchors’ unique, patented design, they can even hold more than most chemical, epoxy, and adhesive anchors.
Metal concrete anchors can’t work when they hit a cavity, because they need something solid to push against. In unexpected cavities (like hollow brick or hollow block) and in hollow walls (like tile over drywall or in drywall itself), the screw opens the ALLIGATOR anchor and locks its thread into the anchor’s teeth to resist pull-out and vibration. This makes the ALLIGATOR All-Purpose Wall Anchor the solution to your fastening problems.
ALLIGATOR All-Purpose Anchors can be used in almost any material, including:
- Concrete
- Brick
- Masonry
- Stone
- Cinder Block
- Cement Block
- Aerated Concrete
- Ceramic Tile
- Green Board
- Plaster
- Stucco
- Drywall
- Wood
- Flakeboard
- RTA Furniture
- Foam-insulated Panels
Versatile—work in all materials: drywall, concrete, brick, tile, plaster, stucco, wood & more with a wide range of screw sizes
Stronger than most metal & chemical anchors and all plastic plugs— anchor bonds screw to concrete, brick & masonry
Won’t spin or countersink into hole, thanks to unique head design & anti-rotation fins
Weather-resistant—seal the hole in concrete, brick & stone: NO caulking or sealant needed
Inexpensive, rustproof installations when used with stainless steel screw.
Ultimate Pull-Out Values as lab tested – Values will differ with screw and host structure:
5mm:
- up to 57lb (25kg) in 1/2″ Drywall using 8g sheet metal screw
- up to 544lb (246kg) in 3500psi Concrete using 8g sheet metal screw
- up to 2316lb (1050kg) in 4000psi Concrete using 10g sheet metal screw
- These can use 4g – 9g (2.8mm – 4.5mm) self tapping screws – as long as they do not have a cutting edge.
6mm:
- up to 69lb (31kg) in 1/2″ Drywall using 10g sheet metal screw
- up to 675lb (307kg) in 3500psi Concrete using 10g sheet metal screw
- up to 2633lb (1194kg) in 4000psi Concrete using 14g sheet metal screw
- These can use 6g – 12g (3.5mm – 5.5mm) self tapping screws – as long as they do not have a cutting edge
8mm:
- up to 85lb (38kg) in 1/2″ Drywall using 12g sheet metal screw
- up to 1025lb (464kg) in 3500psi Concrete using 12g sheet metal screw
- up to 3083lb (1398kg) in 4000psi Concrete using 5/16″ Lag Screw
- These can use 8g – 14g (4.2mm – 6.2mm) self tapping screws – as long as they do not have a cutting edge.
10mm:
- up to 1168lb (529kg) in 3500psi Concrete using 14g sheet metal screw
- up to 3570lb (1619kg) in 4000psi Concrete using 3/8″ Lag Screw
- These can use 10g – 18g (4.8mm – 7mm) self tapping screws – as long as they do not have a cutting edge.
Video Demonstration
CLICK HERE for full manufacturers specs for this product.